Products
Home > products > Drawing machine for Cu and Al

Drawing machine for Cu and Al

Copper & Aluminum Breakdown Machine

The power consumption of the break down machine is very important for the user. We have good design of the transmission system. The machining and the assembling of this system are also critical for the whole machine. Minimum electric consumption and reliable running condition is our target of innovation.

Model Specification
DL 400-9 Copper DL 400-13 Copper DLV400-9 Aluminum DLV400-13 Aluminum
Inlet diameter(mm) 8 8 9.50 9.50mm
Outlet diameter (mm) 2.00~3.50 1.20~3.50 2.40~4.50 1.60~4.50 mm
Number of dies 9 13 9 13
Max. speed (m/min) 1200 1500 1200 1500
Main motor power (kw) DC 185 DC 280 DC 185 or AC200 DC 280 or AC200
Annealing current (A) Max. 4300 AC    
Annealing volt (V) Max. 55 AC    
Annealing capacity (KW) 283    
Double-wire Copper &Aluminum Breakdown Machine
Description Specification
Copper Aluminum
Inlet diameter (mm) 2× 8.00      1× 10.00 2× 9.50    1×12.00
Outlet diameter (mm) 2×(1.20~3.50)   1× 4.50 2×(1.60~4.50)   1× 5.00
Max. speed (m/min) 1500 1500
Number of dies 13 13
Main motor power (kw) DC 510 DC 510
1 2 3 4 5