2022 High quality Hard Facing Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng
2022 High quality Hard Facing Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng Detail:
The line is composed by following machines
● Horizontal or vertical type coil pay-off
● Mechanical descaler & Sand belt descaler
● Water rinsing unit & Electrolytic pickling unit
● Borax coating unit & Drying unit
● 1st Rough dry drawing machine
● 2nd Fine dry drawing machine
● Triple recycled water rinsing & pickling unit
● Copper coating unit
● Skin pass machine
● Spool type take-up
● Layer rewinder
Main technical specifications
|
Item |
Typical Specification |
|
Inlet wire material |
Low carbon steel wire rod |
|
Steel wire diameter(mm) |
5.5-6.5mm |
|
1st Dry drawing process |
From 5.5/6.5mm to 2.0mm |
|
Drawing block No.: 7 |
|
|
Motor power: 30KW |
|
|
Drawing speed: 15m/s |
|
|
2st Dry drawing process |
From 2.0mm to final 0.8mm |
|
Drawing block No.: 8 |
|
|
Motor power: 15Kw |
|
|
Drawing speed: 20m/s |
|
|
Coppering unit |
Only chemical coating type or combined with electrolytic coppering type |
Product detail pictures:
Related Product Guide:
All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for 2022 High quality Hard Facing Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng , The product will supply to all over the world, such as: Portland, US, San Francisco, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound solutions with good logistics service and economical cost. Depending on this, our solutions are sold very well in the countries in Africa, the Mid-East and Southeast Asia.
By Maxine from Mombasa - 2017.05.02 18:28
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By Claire from Birmingham - 2018.12.25 12:43
Related products
-
Factory wholesale Prestressed Concrete Strand M...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Factory Price Weding Wire Forming And Drawing M...
Pay-offs Hydraulic vertical pay-off: Double vertical hydraulic rod stems that easy for wire loaded and capable of continuous wire decoiling. Horizontal pay-off: Simple payoff with two working stems that suitable for the high and low carbon steel wires. It could load two coils of rod that realize the continuous wire rod decoiling. Overhead pay-off: Passive type pay-off for wire coils and equipped with the guiding rollers to avoid any wire disordered. Spool pay-of...
-
Manufacturer for Aluminum Rod Casting And Rolli...
Brief Process Flow Casting machine to get cast bar → roller shearer → straightener → multi-frequency induction heater → feed-in unit → rolling mill → cooling → coiling Advantages With years of machine improvement, our supplied machine is along with the service as: -high energy saving furnace with controlled molten quality -high productivity and efficiency -easy operation and maintain -consistent rod quality -technical support from machine startup to daily machine running Service The t...
-
OEM China Weding Wire Forming And Drawing Machi...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
OEM/ODM China Submerged Arc Welding Wire Produc...
The line is composed by following machines ● Strip pay-off ● Strip surface cleaning unit ● Forming machine with powder feeding system ● Rough drawing and fine drawing machine ● Wire surface cleaning and oiling machine ● Spool take-up ● Layer rewinder Main technical specifications Steel strip material Low carbon steel, stainless steel Steel strip width 8-18mm Steel tape thickness 0.3-1.0mm Feeding speed 70-100m/min Flux filling accuracy ±0.5% Final drawn wire ...
-
Special Price for Tubular Type Machine For Stee...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...