2022 High quality Upward Casting Machine - Up Casting system of Cu-OF Rod PengSheng
2022 High quality Upward Casting Machine - Up Casting system of Cu-OF Rod PengSheng Detail:
Raw material
Good quality copper cathode is suggested to be the raw material for the production to ensure the high mechanical and electrical quality product.
Some percentage of recycled copper could be used too. The de-oxygen time in the furnace will be longer and that may shorter the working life of the furnace. A separte melting furnace for the copper scrap could be installed before the melting furnace to use full recycled copper.
Furnace
Bricks and sand built with melting channels, the furnace is electrically induction heated with various melting capacities. Heating power could be adjusted manually or automaticly to keep the molten copper in the controlled temperature range. The heating principle itself and optimized furnace structure design allow the max. power using and the highest efficiency.
Casting machine
The copper rod or tube is cooled and casted by the cooler. The coolers are fixed on the casting machine frame above the holding furnace. With the servomotor driving system, the casted products are pull upward through the coolers. The solid product after cooling is guided to double coilers or cut-to length machine where to have the final coils or length product.
The machine could work with two different sizes simultaneously when equip with two sets of servo driving system. It is easy to produce different sizes by changing related coolers and dies.
Overview
Casting machine and furnace
Charging device
Take-up machine
Product
On-site service
Main technical data
|
Annual capacity（Tons/Year） |
2000 |
3000 |
4000 |
6000 |
8000 |
10000 |
12000 |
15000 |
|
cooler pieces |
4 |
6 |
8 |
12 |
16 |
20 |
24 |
28 |
|
Rod Dia. in mm |
8,12,17,20,25, 30 and special size demand can be customized |
|||||||
|
Power Consumption |
315 to 350 kwh/ton production |
|||||||
|
Pulling |
Servo motor and inverter |
|||||||
|
Charging |
Manual or automatic type |
|||||||
|
Control |
PLC and touch screen operation |
|||||||
Supply of spare parts
Fusion channel
Shaped brick
Light temperature-keeping brick
Crystallizer assembly
Inner tube of crystallizer
Water tube of crystallizer
Quick joint
Graphite die
Graphite protective case & lining
Asbestos rubber blanket
Nano insulation board
Cr fiber blanket
Product detail pictures:
Related Product Guide:
Our company since its inception, always regards product quality as enterprise life, continuously improve production technology, improve product quality and continuously strengthen enterprise total quality management, in strict accordance with the national standard ISO 9001:2000 for 2022 High quality Upward Casting Machine - Up Casting system of Cu-OF Rod PengSheng , The product will supply to all over the world, such as: Germany, Bandung, El Salvador, If you give us a list of products you are interested in, along with makes and models, we can send you quotations. Please email us directly. Our goal is to establish long-term and mutually profitable business relationships with domestic and overseas clients. We look forward to receiving your reply soon.
By Denise from Borussia Dortmund - 2018.09.21 11:01
This supplier offers high quality but low price products, it is really a nice manufacturer and business partner.
By Pearl Permewan from Rome - 2017.05.02 11:33
Related products
-
Free sample for Continuous Cladding Machine - ...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Chinese Professional Fine Wire Wet Drawing Mach...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Hot-selling PC Steel Strand Skip Stranding Mach...
● The line can be separately from the drawing line or combined with drawing line ● Double couple of pulling capstans up with powerful motor driven ● Movable induction furnace for wire thermo stabilization ● High efficiency water tank for wire cooling ● Double pan type take-up for continuous wire collection Item Unit Specification Wire product size mm 4.0-7.0 Line design speed m/min 150m/min for 7.0mm Pay-off spool size mm 1250 First tension capstan power ...
-
PriceList for PC Strand Machine - Prestressed ...
● The line can be separately from the drawing line or combined with drawing line ● Double couple of pulling capstans up with powerful motor driven ● Movable induction furnace for wire thermo stabilization ● High efficiency water tank for wire cooling ● Double pan type take-up for continuous wire collection Item Unit Specification Wire product size mm 4.0-7.0 Line design speed m/min 150m/min for 7.0mm Pay-off spool size mm 1250 First tension capstan power ...
-
Factory source Aluminum Extrusion Machine - Co...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Wholesale PC Steel Wire Drawing Machine - Cont...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...