8 Year Exporter Steel Wire Rope Clsoer - Steel Wire Electro Galvanizing Line PengSheng
8 Year Exporter Steel Wire Rope Clsoer - Steel Wire Electro Galvanizing Line PengSheng Detail:
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requirements. (1) Pay-offs: Both spool type pay-off and coil type pay-off will be equipped with straightener, tension controller and wire disordered detector to have smoothly wire decoiling. (2) Wire surface treatment tanks: There are fumeless acid pickling tank, degreasing tank, water cleaning tank and activation tank that used for cleaning the wire surface. For low carbon wires, we have the annealing furnace with gas heating or electro heating. (3) Electro galvanizing tank: We use the PP plate as frame and Ti plate for wire galvanizing. The processing solution can be circulated that easy for maintenance. (4) Drying tank: The whole frame is welded by stainless steel and the liner uses fiber cotton to control the inner temperature between 100 to 150℃. (5) Take-ups: Both spool take-up and coil take-up can be used for different sizes galvanized wires. We have supplied hundreds of galvanizing lines to domestic customers and also exported our whole lines to Indonesia, Bulgaria, Vietnam, Uzbekistan, Sri Lanka.
Main features
1. Applicable for high/medium/low carbon steel wire;
2. Better wire coating concentricity;
3. Lower power consumption;
4. Better control of coating weight and consistency;
Main technical specification
|
Item |
Data |
|
Wire diameter |
0.8-6.0mm |
|
Coating weight |
10-300g/m2 |
|
Wire numbers |
24 wires (Can be required by customer) |
|
DV value |
60-160mm*m/min |
|
Anode |
Lead sheet or Titanuim polar plate |
Product detail pictures:
Related Product Guide:
Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for 8 Year Exporter Steel Wire Rope Clsoer - Steel Wire Electro Galvanizing Line PengSheng , The product will supply to all over the world, such as: kazan, Florence, Swedish, The credibility is the priority, and the service is the vitality. We promise we have the ability to provide excellent quality and reasonable price products for customers. With us, your safety is guaranteed.
By Maggie from Austria - 2017.08.15 12:36
After the signing of the contract, we received satisfactory goods in a short term, this is a commendable manufacturer.
By Gwendolyn from Mongolia - 2018.09.08 17:09
Related products
-
Hot New Products PC Steel Wire Drawing Machine ...
● Heavy duty machine with nine 1200mm blocks ● Rotating type pay-off suitable for high carbon wire rods. ● Sensitive rollers for wire tension control ● Powerful motor with high efficiency transmission system ● International NSK bearing and Siemens electrical control Item Unit Specification Inlet wire Dia. mm 8.0-16.0 Outlet wire Dia. mm 4.0-9.0 Block size mm 1200 Line speed mm 5.5-7.0 Block motor power KW 132 Block cooling type Inner water...
-
Factory Price Steel Rope Tubular Stranding Mach...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Reasonable price for Inverted Steel Wire Drawin...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Special Design for Electrolytic Galvanizing Lin...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Factory Cheap Hot Hot Dip Galvanized Wire Plant...
Main characters 1, adopted excellent alloy while nitrogen treatment for screw and barrel, stable and long service life. 2, heating and cooling system is special designed while the temperature could be set in the range of 0-380℃ with high-precision control. 3, friendly operation by PLC+ touch screen 4, L/D ratio of 36:1 for special cable applications（physical foaming etc.） 1.High efficiency extrusion machine Application: Mainly used for insulation or sheath extrusion of wires and cables ...
-
Factory source Aluminum Extrusion Machine - Co...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...