Chinese Professional Co2 Gas Shield Welding Wire Production Line - Flux Cored Welding Wire Production Line PengSheng
Chinese Professional Co2 Gas Shield Welding Wire Production Line - Flux Cored Welding Wire Production Line PengSheng Detail:
The line is composed by following machines
● Strip pay-off
● Strip surface cleaning unit
● Forming machine with powder feeding system
● Rough drawing and fine drawing machine
● Wire surface cleaning and oiling machine
● Spool take-up
● Layer rewinder
Main technical specifications
|
Steel strip material |
Low carbon steel, stainless steel |
|
Steel strip width |
8-18mm |
|
Steel tape thickness |
0.3-1.0mm |
|
Feeding speed |
70-100m/min |
|
Flux filling accuracy |
±0.5% |
|
Final drawn wire size |
1.0-1.6mm or as customer required |
|
Drawing line speed |
Max. 20m/s |
|
Motor/PLC/Electrical elements |
SIEMENS/ABB |
|
Pneumatic parts/Bearings |
FESTO/NSK |
Product detail pictures:
Related Product Guide:
We thinks what buyers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better high-quality, reduced processing costs, charges are more reasonable, won the new and outdated consumers the support and affirmation for Chinese Professional Co2 Gas Shield Welding Wire Production Line - Flux Cored Welding Wire Production Line PengSheng , The product will supply to all over the world, such as: Sri Lanka, Japan, New York, We have gained a lot of recognition among customers spread all across the world. They trust us and always give repetitive orders. Furthermore, mentioned below are some of the major factors that have played significant role in our tremendous growth in this domain.
By Aurora from Vietnam - 2018.11.22 12:28
Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
By Geraldine from Swedish - 2017.08.18 11:04
Related products
-
2022 Good Quality Copper Casting Machine - Con...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
2022 Latest Design Galvanized Steel Wire Produc...
Main technical data No. Model Number of bobbin Rope size Rotating Speed (rpm) Tension wheel size (mm) Motor power (KW) Min. Max. 1 KS 6/630 6 15 25 80 1200 37 2 KS 6/800 6 20 35 60 1600 45 3 KS 8/1000 8 25 50 50 1800 75 4 KS 8/1600 8 50 100 35 3000 90 5 KS 8/1800 8 60 120 30 4000 132 6 KS 8/2000 8 70 150 25 5000 160
-
Renewable Design for Hot-Dip Steel Wire Galvani...
Galvanized wire products ● Low carbon bedding spring wire ● ACSR (Aluminum conductor steel reinforced) ● Armoring cables ● Razor wires ● Baling wires ● Some general purpose galvanized strand ● Galvanized wire mesh & fence Main features ● High efficiency heating unit and insulation ● Matal or ceramic pot for zinc ● Immersion type burners with full-auto N2 wiping system ● Fumes energy reused on the dryer and zinc pan ● Networked PLC control system Item Specification Inlet wire ma...
-
PriceList for Copper Drawing Machine - Continu...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Special Design for Electrolytic Galvanizing Lin...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Manufacturer for Steel Wire Processing Machine ...
Main features ● High speed rotor system with international brand bearings ● Stable runinng of wire stranding process ● High quality seamless steel pipe for stranding tube with tempering treatment ● Optional for the preformer, post former and compacting equipment ● Double capstan haul-offs tailored to the customer requirements Main technical data No. Model Wire Size(mm) Strand Size(mm) Power (KW) Rotating Speed(rpm) Dimension (mm) Min. Max. Min. Max. 1 6/200 0...