Chinese Professional Copper Rod Continuous Casting Machine - Up Casting system of Cu-OF Rod PengSheng

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

In an effort to finest meet up with client's requirements, all of our operations are strictly performed in line with our motto "High High quality, Competitive Rate, Fast Service" for Coiler and Spooler, Copper Drawing Machine, Scrape Aluminum Casting Machine, Our Enterprise Core Principle: The prestige 1st ;The quality guarantee ;The customer are supreme.
Chinese Professional Copper Rod Continuous Casting Machine - Up Casting system of Cu-OF Rod PengSheng Detail:

Raw material

Good quality copper cathode is suggested to be the raw material for the production to ensure the high mechanical and electrical quality product.
Some percentage of recycled copper could be used too. The de-oxygen time in the furnace will be longer and that may shorter the working life of the furnace. A separte melting furnace for the copper scrap could be installed before the melting furnace to use full recycled copper.

Furnace

Bricks and sand built with melting channels, the furnace is electrically induction heated with various melting capacities. Heating power could be adjusted manually or automaticly to keep the molten copper in the controlled temperature range. The heating principle itself and optimized furnace structure design allow the max. power using and the highest efficiency.

Casting machine

The copper rod or tube is cooled and casted by the cooler. The coolers are fixed on the casting machine frame above the holding furnace. With the servomotor driving system, the casted products are pull upward through the coolers. The solid product after cooling is guided to double coilers or cut-to length machine where to have the final coils or length product.
The machine could work with two different sizes simultaneously when equip with two sets of servo driving system. It is easy to produce different sizes by changing related coolers and dies.

Up Casting system of Cu-OF Rod

Overview

Up Casting system of Cu-OF Rod (1)

Casting machine and furnace

Up Casting system of Cu-OF Rod

Charging device

Up Casting system of Cu-OF Rod (3)

Take-up machine

Up Casting system of Cu-OF Rod

Product

Up Casting system of Cu-OF Rod

On-site service

Main technical data

Annual capacity(Tons/Year)

2000

3000

4000

6000

8000

10000

12000

15000

cooler pieces

4

6

8

12

16

20

24

28

Rod Dia. in mm

8,12,17,20,25, 30 and special size demand can be customized

Power Consumption

315 to 350 kwh/ton production

Pulling

Servo motor and inverter

Charging

Manual or automatic type

Control

PLC and touch screen operation

Supply of spare parts

Up Casting system of Cu-OF Rod

Fusion channel

Up Casting system of Cu-OF Rod

Shaped brick

Up Casting system of Cu-OF Rod

Light temperature-keeping brick

Up Casting system of Cu-OF Rod

Crystallizer assembly

Up Casting system of Cu-OF Rod

Inner tube of crystallizer

Up Casting system of Cu-OF Rod

Water tube of crystallizer

Up Casting system of Cu-OF Rod

Quick joint

Up Casting system of Cu-OF Rod

Graphite die

Up Casting system of Cu-OF Rod

Graphite protective case & lining

Up Casting system of Cu-OF Rod

Asbestos rubber blanket

Up Casting system of Cu-OF Rod

Nano insulation board

Up Casting system of Cu-OF Rod

Cr fiber blanket


Product detail pictures:

Chinese Professional Copper Rod Continuous Casting Machine - Up Casting system of Cu-OF Rod PengSheng detail pictures


Related Product Guide:

Bear "Customer first, Quality first" in mind, we work closely with our customers and provide them with efficient and professional services for Chinese Professional Copper Rod Continuous Casting Machine - Up Casting system of Cu-OF Rod PengSheng , The product will supply to all over the world, such as: Luxembourg, Slovak Republic, Bangladesh, At Present, our products have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
  • This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
    5 Stars By Mark from Portugal - 2017.06.29 18:55
    We have worked with many companies, but this time is the best,detailed explanation, timely delivery and quality qualified, nice!
    5 Stars By olivier musset from Seychelles - 2018.05.15 10:52
    Write your message here and send it to us

    Related products

    • OEM/ODM Factory Under Roller Type Steel Stranding Line - Prestressed Concrete (PC)Steel Wire Drawing Machine PengSheng

      OEM/ODM Factory Under Roller Type Steel Strandi...

      ● Heavy duty machine with nine 1200mm blocks ● Rotating type pay-off suitable for high carbon wire rods. ● Sensitive rollers for wire tension control ● Powerful motor with high efficiency transmission system ● International NSK bearing and Siemens electrical control Item Unit Specification Inlet wire Dia. mm 8.0-16.0 Outlet wire Dia. mm 4.0-9.0 Block size mm 1200 Line speed mm 5.5-7.0 Block motor power KW 132 Block cooling type Inner water...

    • 2022 High quality Steel Wire Drawing Production Line - Steel Wire Hot-Dip Galvanizing Line PengSheng

      2022 High quality Steel Wire Drawing Production...

      Galvanized wire products ● Low carbon bedding spring wire ● ACSR (Aluminum conductor steel reinforced) ● Armoring cables ● Razor wires ● Baling wires ● Some general purpose galvanized strand ● Galvanized wire mesh & fence  Main features ● High efficiency heating unit and insulation ● Matal or ceramic pot for zinc ● Immersion type burners with full-auto N2 wiping system ● Fumes energy reused on the dryer and zinc pan ● Networked PLC control system Item Specification Inlet wire ma...

    • 2022 wholesale price Copper Casting Machine - Up Casting system of Cu-OF Rod PengSheng

      2022 wholesale price Copper Casting Machine - ...

      Raw material Good quality copper cathode is suggested to be the raw material for the production to ensure the high mechanical and electrical quality product. Some percentage of recycled copper could be used too. The de-oxygen time in the furnace will be longer and that may shorter the working life of the furnace. A separte melting furnace for the copper scrap could be installed before the melting furnace to use full recycled copper. Furnace Bricks and sand built with melting channels, the fur...

    • PriceList for Horizontal Concentric Taping Machine - Fiber Glass Insulating Machine PengSheng

      PriceList for Horizontal Concentric Taping Mach...

      Main technical data Round conductor diameter: 2.5mm—6.0mm Flat conductor area: 5mm²—80 mm²(Width: 4mm-16mm, Thickness: 0.8mm-5.0mm) Rotating speed: max. 800 rpm Line speed: max. 8 m/min. Special Characteristics Servo drive for the winding head Auto-stop when fiberglass broken Rigid and modular structure design to eliminate vibration interaction PLC control and touch screen operation Overview Taping Oven Product

    • Manufacturer for Copper Wire Intermediate Drawing Machine - Steel Wire Drawing Machine-Auxiliary Machines PengSheng

      Manufacturer for Copper Wire Intermediate Drawi...

      Pay-offs Hydraulic vertical pay-off: Double vertical hydraulic rod stems that easy for wire loaded and capable of continuous wire decoiling. Horizontal pay-off: Simple payoff with two working stems that suitable for the high and low carbon steel wires. It could load two coils of rod that realize the continuous wire rod decoiling. Overhead pay-off:  Passive type pay-off for wire coils and equipped with the guiding rollers to avoid any wire disordered. Spool pay-of...

    • Factory wholesale PC Strand Production Line - Continuous Extrusion Machinery PengSheng

      Factory wholesale PC Strand Production Line - ...

       Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...