Excellent quality Stainless Steel Welding Wire Production Line – Welding Wire Drawing & Coppering Line PengSheng
Excellent quality Stainless Steel Welding Wire Production Line – Welding Wire Drawing & Coppering Line PengSheng Detail:
The line is composed by following machines
● Horizontal or vertical type coil pay-off
● Mechanical descaler & Sand belt descaler
● Water rinsing unit & Electrolytic pickling unit
● Borax coating unit & Drying unit
● 1st Rough dry drawing machine
● 2nd Fine dry drawing machine
● Triple recycled water rinsing & pickling unit
● Copper coating unit
● Skin pass machine
● Spool type take-up
● Layer rewinder
Main technical specifications
|
Item |
Typical Specification |
|
Inlet wire material |
Low carbon steel wire rod |
|
Steel wire diameter(mm) |
5.5-6.5mm |
|
1st Dry drawing process |
From 5.5/6.5mm to 2.0mm |
|
Drawing block No.: 7 |
|
|
Motor power: 30KW |
|
|
Drawing speed: 15m/s |
|
|
2st Dry drawing process |
From 2.0mm to final 0.8mm |
|
Drawing block No.: 8 |
|
|
Motor power: 15Kw |
|
|
Drawing speed: 20m/s |
|
|
Coppering unit |
Only chemical coating type or combined with electrolytic coppering type |
Product detail pictures:
Related Product Guide:
In order to give you convenience and enlarge our business, we also have inspectors in QC Team and assure you our best service and product for Excellent quality Stainless Steel Welding Wire Production Line – Welding Wire Drawing & Coppering Line PengSheng , The product will supply to all over the world, such as: Pakistan, Leicester, Belarus, Since its foundation , the company keeps living up to the belief of "honest selling , best quality , people-orientation and benefits to customers. " We're doing everything to supply our customers with best services and best solutions . We promise that we are going to be responsible all the way to the end once our services begin.
By Rachel from Canada - 2017.09.30 16:36
Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.
By Rigoberto Boler from Algeria - 2018.10.09 19:07
Related products
-
China wholesale Continuous Casting And Rolling ...
Brief Process Flow Casting machine to get cast bar → roller shearer → straightener → multi-frequency induction heater → feed-in unit → rolling mill → cooling → coiling Advantages With years of machine improvement, our supplied machine is along with the service as: -high energy saving furnace with controlled molten quality -high productivity and efficiency -easy operation and maintain -consistent rod quality -technical support from machine startup to daily machine running Service The t...
-
Rapid Delivery for High Dv Wire Galvanizing Fur...
Galvanized wire products ● Low carbon bedding spring wire ● ACSR (Aluminum conductor steel reinforced) ● Armoring cables ● Razor wires ● Baling wires ● Some general purpose galvanized strand ● Galvanized wire mesh & fence Main features ● High efficiency heating unit and insulation ● Matal or ceramic pot for zinc ● Immersion type burners with full-auto N2 wiping system ● Fumes energy reused on the dryer and zinc pan ● Networked PLC control system Item Specification Inlet wire ma...
-
Chinese wholesale Aluminum Alloy Rod Casting An...
Raw material and furnace By using vertical melting furnace and titled holding furnace, you can feed copper cathode as the raw material and then produce copper rod with the highest constant quality and continuous&high production rate. By using reverberatory furnace, you can feed 100% copper scrap in various quality and purity. The furnace standard capacity is 40, 60, 80 and 100 tons loading per shift/day. The furnace is developed with: -Increased thermal efficiency -Long working life -Easi...
-
Factory wholesale Aluminum Wire Intermediate Dr...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Best Price for Aluminum Pipe Extrusion Machine ...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
OEM/ODM Supplier Prestressing Steel Stranding M...
Main technical data No. Model Number of bobbin Rope size Rotating Speed (rpm) Tension wheel size (mm) Motor power (KW) Min. Max. 1 KS 6/630 6 15 25 80 1200 37 2 KS 6/800 6 20 35 60 1600 45 3 KS 8/1000 8 25 50 50 1800 75 4 KS 8/1600 8 50 100 35 3000 90 5 KS 8/1800 8 60 120 30 4000 132 6 KS 8/2000 8 70 150 25 5000 160