Factory Cheap Hot Flux Cored Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng
Factory Cheap Hot Flux Cored Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng Detail:
The line is composed by following machines
● Horizontal or vertical type coil pay-off
● Mechanical descaler & Sand belt descaler
● Water rinsing unit & Electrolytic pickling unit
● Borax coating unit & Drying unit
● 1st Rough dry drawing machine
● 2nd Fine dry drawing machine
● Triple recycled water rinsing & pickling unit
● Copper coating unit
● Skin pass machine
● Spool type take-up
● Layer rewinder
Main technical specifications
|
Item |
Typical Specification |
|
Inlet wire material |
Low carbon steel wire rod |
|
Steel wire diameter(mm) |
5.5-6.5mm |
|
1st Dry drawing process |
From 5.5/6.5mm to 2.0mm |
|
Drawing block No.: 7 |
|
|
Motor power: 30KW |
|
|
Drawing speed: 15m/s |
|
|
2st Dry drawing process |
From 2.0mm to final 0.8mm |
|
Drawing block No.: 8 |
|
|
Motor power: 15Kw |
|
|
Drawing speed: 20m/s |
|
|
Coppering unit |
Only chemical coating type or combined with electrolytic coppering type |
Product detail pictures:
Related Product Guide:
Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for Factory Cheap Hot Flux Cored Welding Wire Production Line - Welding Wire Drawing & Coppering Line PengSheng , The product will supply to all over the world, such as: Detroit, Hyderabad, Washington, In order to meet the increasing requirement of customers both home and aboard, we will keep carrying forward the enterprise spirit of "Quality, Creativity, Efficiency and Credit" and strive to top the current trend and lead fashion. We warmly welcome you to visit our company and make cooperation.
By Octavia from Hamburg - 2017.09.22 11:32
The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
By Sabina from Slovenia - 2018.07.12 12:19
Related products
-
Best Price for Aluminum Pipe Extrusion Machine ...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
8 Year Exporter Copper Flat Wire Extrusion Mach...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4,...
-
Factory wholesale Reinforced Steel PC Stranding...
● The line can be separately from the drawing line or combined with drawing line ● Double couple of pulling capstans up with powerful motor driven ● Movable induction furnace for wire thermo stabilization ● High efficiency water tank for wire cooling ● Double pan type take-up for continuous wire collection Item Unit Specification Wire product size mm 4.0-7.0 Line design speed m/min 150m/min for 7.0mm Pay-off spool size mm 1250 First tension capstan power ...
-
Wholesale Price China PC Steel Wire Drawing Lin...
● The line can be separately from the drawing line or combined with drawing line ● Double couple of pulling capstans up with powerful motor driven ● Movable induction furnace for wire thermo stabilization ● High efficiency water tank for wire cooling ● Double pan type take-up for continuous wire collection Item Unit Specification Wire product size mm 4.0-7.0 Line design speed m/min 150m/min for 7.0mm Pay-off spool size mm 1250 First tension capstan power ...
-
2022 China New Design Flux Cored Welding Wire M...
The line is composed by following machines ● Strip pay-off ● Strip surface cleaning unit ● Forming machine with powder feeding system ● Rough drawing and fine drawing machine ● Wire surface cleaning and oiling machine ● Spool take-up ● Layer rewinder Main technical specifications Steel strip material Low carbon steel, stainless steel Steel strip width 8-18mm Steel tape thickness 0.3-1.0mm Feeding speed 70-100m/min Flux filling accuracy ±0.5% Final drawn wire ...
-
Reasonable price for Inverted Steel Wire Drawin...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...