Factory Cheap Hot Scrap Copper Casting Machine - Aluminum Continuous Casting And Rolling Line—Aluminum Rod CCR Line PengSheng
Factory Cheap Hot Scrap Copper Casting Machine - Aluminum Continuous Casting And Rolling Line—Aluminum Rod CCR Line PengSheng Detail:
Brief Process Flow
Casting machine to get cast bar → roller shearer → straightener → multi-frequency induction heater → feed-in unit → rolling mill → cooling → coiling
Advantages
With years of machine improvement, our supplied machine is along with the service as:
-high energy saving furnace with controlled molten quality
-high productivity and efficiency
-easy operation and maintain
-consistent rod quality
-technical support from machine startup to daily machine running
Service
The technical service for this system is critical for the client. Besides the machine itself, we give technical service for the machine installation, running, training and daily maintain support.
With years of experience, we are capable to run the machine well with our customers to have their best ecnomical benefit.
Product detail pictures:
Related Product Guide:
Like a result of ours specialty and repair consciousness, our enterprise has won a superb popularity amid buyers everywhere in the environment for Factory Cheap Hot Scrap Copper Casting Machine - Aluminum Continuous Casting And Rolling Line—Aluminum Rod CCR Line PengSheng , The product will supply to all over the world, such as: Greece, South Korea, Netherlands, We are seeking the chances to meet all the friends from both at home and abroad for the win-win cooperation. We sincerely hope to have long-term cooperation with all of you on the bases of mutual benefit and common development.
By Michelle from Ecuador - 2017.06.19 13:51
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Hedy from Paraguay - 2017.10.25 15:53
Related products
-
Cheapest Factory Dry Steel Wire Drawing Machine...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Good Quality Drawing Machine For Copper, Alumin...
Features ● Forged or casted capstan with hardness of HRC 58-62. ● High efficiency transmission with gear box or belt. ● Movable die box for easy adjustment and easy die changing. ● High performance cooling system for the capstan and die box ● High safety standard and friendly HMI control system Available options ● Rotating die box with soap stirrers or rolling cassette ● Forged capstan and tungsten carbide coated capstan ● Accumulation of first drawing blocks ● Block stripper for coiling ● Fi...
-
Special Price for Wire Fiberglass Insulating Ma...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
China wholesale Wire Insulating Machine - PI F...
Main technical data Round conductor diameter: 2.5mm—6.0mm Flat conductor area: 5 mm²—80 mm²（Width: 4mm-16mm, Thickness: 0.8mm-5.0mm） Rotating speed: max. 1500 rpm Line speed: max. 12 m/min Special Characteristics -Servo drive for the concentric tapping head -IGBT induction heater and moving radiant oven -Auto-stop when film broken -PLC control and touch screen operation Overview Taping IGBT Induction heater Radiant oven Take-up Product
-
Manufacturer for Copper Rod Casting And Rolling...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4,...
-
Bottom price Copper Rod Breakdown Machine - Co...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...