Factory Cheap Hot Scrap Copper Casting Machine - Up Casting system of Cu-OF Rod PengSheng
Factory Cheap Hot Scrap Copper Casting Machine - Up Casting system of Cu-OF Rod PengSheng Detail:
Raw material
Good quality copper cathode is suggested to be the raw material for the production to ensure the high mechanical and electrical quality product.
Some percentage of recycled copper could be used too. The de-oxygen time in the furnace will be longer and that may shorter the working life of the furnace. A separte melting furnace for the copper scrap could be installed before the melting furnace to use full recycled copper.
Furnace
Bricks and sand built with melting channels, the furnace is electrically induction heated with various melting capacities. Heating power could be adjusted manually or automaticly to keep the molten copper in the controlled temperature range. The heating principle itself and optimized furnace structure design allow the max. power using and the highest efficiency.
Casting machine
The copper rod or tube is cooled and casted by the cooler. The coolers are fixed on the casting machine frame above the holding furnace. With the servomotor driving system, the casted products are pull upward through the coolers. The solid product after cooling is guided to double coilers or cut-to length machine where to have the final coils or length product.
The machine could work with two different sizes simultaneously when equip with two sets of servo driving system. It is easy to produce different sizes by changing related coolers and dies.
Overview
Casting machine and furnace
Charging device
Take-up machine
Product
On-site service
Main technical data
|
Annual capacity（Tons/Year） |
2000 |
3000 |
4000 |
6000 |
8000 |
10000 |
12000 |
15000 |
|
cooler pieces |
4 |
6 |
8 |
12 |
16 |
20 |
24 |
28 |
|
Rod Dia. in mm |
8,12,17,20,25, 30 and special size demand can be customized |
|||||||
|
Power Consumption |
315 to 350 kwh/ton production |
|||||||
|
Pulling |
Servo motor and inverter |
|||||||
|
Charging |
Manual or automatic type |
|||||||
|
Control |
PLC and touch screen operation |
|||||||
Supply of spare parts
Fusion channel
Shaped brick
Light temperature-keeping brick
Crystallizer assembly
Inner tube of crystallizer
Water tube of crystallizer
Quick joint
Graphite die
Graphite protective case & lining
Asbestos rubber blanket
Nano insulation board
Cr fiber blanket
Product detail pictures:
Related Product Guide:
With our loaded practical experience and thoughtful solutions, we now have been identified for a trusted provider for numerous intercontinental consumers for Factory Cheap Hot Scrap Copper Casting Machine - Up Casting system of Cu-OF Rod PengSheng , The product will supply to all over the world, such as: Philadelphia, America, Thailand, Our staffs are rich in experience and trained strictly, with qualified knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to deliver the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we'll develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.
By Jean Ascher from Vietnam - 2017.10.27 12:12
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.
By Eunice from Rwanda - 2017.04.18 16:45
Related products
-
Newly Arrival Wire Making Machine - Continuous...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Online Exporter Magnet Wire Paper Wrapping Mach...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Factory Promotional Drawn Steel Wire Machine -...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
OEM Factory for PC Rope Skip Stranding Line - ...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
2022 Latest Design Steel Wire Rope Machine - C...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Chinese Professional Wet Steel Wire Drawing Mac...
Main technical data No. Model Number of bobbin Rope size Rotating Speed (rpm) Tension wheel size (mm) Motor power (KW) Min. Max. 1 KS 6/630 6 15 25 80 1200 37 2 KS 6/800 6 20 35 60 1600 45 3 KS 8/1000 8 25 50 50 1800 75 4 KS 8/1600 8 50 100 35 3000 90 5 KS 8/1800 8 60 120 30 4000 132 6 KS 8/2000 8 70 150 25 5000 160