Good quality Flux Cored Welding Wire Manufacturing Line - Welding Wire Drawing & Coppering Line PengSheng
Good quality Flux Cored Welding Wire Manufacturing Line - Welding Wire Drawing & Coppering Line PengSheng Detail:
The line is composed by following machines
● Horizontal or vertical type coil pay-off
● Mechanical descaler & Sand belt descaler
● Water rinsing unit & Electrolytic pickling unit
● Borax coating unit & Drying unit
● 1st Rough dry drawing machine
● 2nd Fine dry drawing machine
● Triple recycled water rinsing & pickling unit
● Copper coating unit
● Skin pass machine
● Spool type take-up
● Layer rewinder
Main technical specifications
|
Item |
Typical Specification |
|
Inlet wire material |
Low carbon steel wire rod |
|
Steel wire diameter(mm) |
5.5-6.5mm |
|
1st Dry drawing process |
From 5.5/6.5mm to 2.0mm |
|
Drawing block No.: 7 |
|
|
Motor power: 30KW |
|
|
Drawing speed: 15m/s |
|
|
2st Dry drawing process |
From 2.0mm to final 0.8mm |
|
Drawing block No.: 8 |
|
|
Motor power: 15Kw |
|
|
Drawing speed: 20m/s |
|
|
Coppering unit |
Only chemical coating type or combined with electrolytic coppering type |
Product detail pictures:
Related Product Guide:
We strive for excellence, services the customers", hopes to be the top cooperation team and dominator business for personnel, suppliers and prospects, realizes benefit share and continual promotion for Good quality Flux Cored Welding Wire Manufacturing Line - Welding Wire Drawing & Coppering Line PengSheng , The product will supply to all over the world, such as: Cambodia, Philippines, Sydney, The development of our company not only needs the guarantee of quality, reasonable price and perfect service, but also relies on our customer's trust and support! In the future, we will continue with the most professional and high quality service to provide the most competitive price, Together with our customers and achieve win-win! Welcome to inquiry and consult!
By Jocelyn from Ecuador - 2018.05.15 10:52
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
By Arabela from Czech Republic - 2018.12.10 19:03
Related products
-
Cheapest Price Steel Wire Strander - Continuou...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
China wholesale Continuous Casting And Rolling ...
Raw material Good quality copper cathode is suggested to be the raw material for the production to ensure the high mechanical and electrical quality product. Some percentage of recycled copper could be used too. The de-oxygen time in the furnace will be longer and that may shorter the working life of the furnace. A separte melting furnace for the copper scrap could be installed before the melting furnace to use full recycled copper. Furnace Bricks and sand built with melting channels, the fur...
-
PriceList for PC Steel Strand Skip Stranding Ma...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Super Lowest Price Multi Wire Drawing Machine -...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Special Design for Steel Rope Tubular Stranding...
Machine model LT21/200 LT17/250 LT21/350 LT15/450 Inlet wire material High /Medium / Low carbon steel wire; Stainless steel wire; Alloy steel wire Drawing passes 21 17 21 15 Inlet wire Dia. 1.2-0.9mm 1.8-2.4mm 1.8-2.8mm 2.6-3.8mm Outlet wire Dia. 0.4-0.15mm 0.6-0.35mm 0.5-1.2mm 1.2-1.8mm Drawing speed 15m/s 10 8m/s 10m/s Motor power 22KW 30KW 55KW 90KW Main bearings International NSK, SKF bearings or customer ...
-
Cheap PriceList for Take-Up Spool Machine - Co...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...