High reputation PC Steel Wire Stablization Line - Steel Wire Electro Galvanizing Line PengSheng
High reputation PC Steel Wire Stablization Line - Steel Wire Electro Galvanizing Line PengSheng Detail:
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requirements. (1) Pay-offs: Both spool type pay-off and coil type pay-off will be equipped with straightener, tension controller and wire disordered detector to have smoothly wire decoiling. (2) Wire surface treatment tanks: There are fumeless acid pickling tank, degreasing tank, water cleaning tank and activation tank that used for cleaning the wire surface. For low carbon wires, we have the annealing furnace with gas heating or electro heating. (3) Electro galvanizing tank: We use the PP plate as frame and Ti plate for wire galvanizing. The processing solution can be circulated that easy for maintenance. (4) Drying tank: The whole frame is welded by stainless steel and the liner uses fiber cotton to control the inner temperature between 100 to 150℃. (5) Take-ups: Both spool take-up and coil take-up can be used for different sizes galvanized wires. We have supplied hundreds of galvanizing lines to domestic customers and also exported our whole lines to Indonesia, Bulgaria, Vietnam, Uzbekistan, Sri Lanka.
Main features
1. Applicable for high/medium/low carbon steel wire;
2. Better wire coating concentricity;
3. Lower power consumption;
4. Better control of coating weight and consistency;
Main technical specification
|
Item |
Data |
|
Wire diameter |
0.8-6.0mm |
|
Coating weight |
10-300g/m2 |
|
Wire numbers |
24 wires (Can be required by customer) |
|
DV value |
60-160mm*m/min |
|
Anode |
Lead sheet or Titanuim polar plate |
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for High reputation PC Steel Wire Stablization Line - Steel Wire Electro Galvanizing Line PengSheng , The product will supply to all over the world, such as: Slovakia, America, Brisbane, We will not only continuously introduce technical guidance of experts from both home and abroad, but also develop the new and advanced products constantly to satisfactorily meet the needs of our clients all over the world.
By Martina from Mongolia - 2017.07.28 15:46
The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!
By Lulu from Mali - 2018.07.27 12:26
Related products
-
Factory Cheap Hot Scrap Copper Casting Machine ...
Brief Process Flow Casting machine to get cast bar → roller shearer → straightener → multi-frequency induction heater → feed-in unit → rolling mill → cooling → coiling Advantages With years of machine improvement, our supplied machine is along with the service as: -high energy saving furnace with controlled molten quality -high productivity and efficiency -easy operation and maintain -consistent rod quality -technical support from machine startup to daily machine running Service The t...
-
Wholesale Price Aluminum Clad Steel Wire Contin...
●High efficiency water cooled capstan & drawing die ●HMI for easy operation and monitoring ●Water cooling for capstan and drawing die ●Single or double dies / Normal or pressure dies Block diameter DL 600 DL 900 DL 1000 DL 1200 Inlet wire material High/Medium/Low carbon steel wire; Stainless wire, Spring wire Inlet wire Dia. 3.0-7.0mm 10.0-16.0mm 12mm-18mm 18mm-25mm Drawing speed According to the d Motor power (For reference) 45KW 90KW 132KW ...
-
Factory Cheap Hot Scrap Copper Casting Machine ...
Raw material and furnace By using vertical melting furnace and titled holding furnace, you can feed copper cathode as the raw material and then produce copper rod with the highest constant quality and continuous&high production rate. By using reverberatory furnace, you can feed 100% copper scrap in various quality and purity. The furnace standard capacity is 40, 60, 80 and 100 tons loading per shift/day. The furnace is developed with: -Increased thermal efficiency -Long working life -Easi...
-
High reputation PC Wire & Strand Machine -...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
PriceList for PC Strand Machine - Prestressed ...
● Bow skip type strander to produce international standard strands. ● Double couple of pulling capstan up to 16 tons force. ● Movable induction furnace for wire thermo mechanical stabilization ● High efficiency water tank for wire cooling ● Double spool take-up/pay-off (The first working as take-up and the second working as pay-off for rewinder) Item Unit Specification Strand product size mm 9.53; 11.1; 12.7; 15.24; 17.8 Line working speed m/min 100m/min for 15.24mm ...
-
OEM China Weding Wire Forming And Drawing Machi...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...