Manufacturing Companies for Big Bearing Steel Stranding Line - Steel Wire Hot-Dip Galvanizing Line PengSheng
Manufacturing Companies for Big Bearing Steel Stranding Line - Steel Wire Hot-Dip Galvanizing Line PengSheng Detail:
Galvanized wire products
● Low carbon bedding spring wire
● ACSR (Aluminum conductor steel reinforced)
● Armoring cables
● Razor wires
● Baling wires
● Some general purpose galvanized strand
● Galvanized wire mesh & fence
Main features
● High efficiency heating unit and insulation
● Matal or ceramic pot for zinc
● Immersion type burners with full-auto N2 wiping system
● Fumes energy reused on the dryer and zinc pan
● Networked PLC control system
|
Item |
Specification |
|
Inlet wire material |
Low carbon &High carbon alloy and non-alloy galvanized wire |
|
Steel wire diameter(mm) |
0.8-13.0 |
|
Number of steel wires |
12-40 (As customer required) |
|
Line DV value |
≤150 (Depend on product) |
|
Temperature of liquid zinc in zinc pot(℃) |
440-460 |
|
Zinc pot |
Steel pot or ceramic pot |
|
Wiping method |
PAD, Nitrogen, Charcoal |
Product detail pictures:
Related Product Guide:
We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Manufacturing Companies for Big Bearing Steel Stranding Line - Steel Wire Hot-Dip Galvanizing Line PengSheng , The product will supply to all over the world, such as: Miami, Naples, Senegal, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Daniel Coppin from Oslo - 2018.09.29 17:23
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Sahid Ruvalcaba from Brasilia - 2018.05.13 17:00
Related products
-
OEM China Weding Wire Forming And Drawing Machi...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
New Fashion Design for Tubular Steel Cable Stra...
Main features ● High speed rotor system with international brand bearings ● Stable runinng of wire stranding process ● High quality seamless steel pipe for stranding tube with tempering treatment ● Optional for the preformer, post former and compacting equipment ● Double capstan haul-offs tailored to the customer requirements Main technical data No. Model Wire Size(mm) Strand Size(mm) Power (KW) Rotating Speed(rpm) Dimension (mm) Min. Max. Min. Max. 1 6/200 0...
-
18 Years Factory Magnet Wire Paper Taping Machi...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
New Delivery for Steel Wire Galvanizing Machine...
Machine model LT21/200 LT17/250 LT21/350 LT15/450 Inlet wire material High /Medium / Low carbon steel wire; Stainless steel wire; Alloy steel wire Drawing passes 21 17 21 15 Inlet wire Dia. 1.2-0.9mm 1.8-2.4mm 1.8-2.8mm 2.6-3.8mm Outlet wire Dia. 0.4-0.15mm 0.6-0.35mm 0.5-1.2mm 1.2-1.8mm Drawing speed 15m/s 10 8m/s 10m/s Motor power 22KW 30KW 55KW 90KW Main bearings International NSK, SKF bearings or customer ...
-
Top Quality Planetary Steel Rope Strander - Co...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
China New Product Electrical Wire Making Machin...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...