OEM Manufacturer Stainless Steel Welding Wire Production Line - Steel Wire Electro Galvanizing Line PengSheng
OEM Manufacturer Stainless Steel Welding Wire Production Line - Steel Wire Electro Galvanizing Line PengSheng Detail:
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requirements. (1) Pay-offs: Both spool type pay-off and coil type pay-off will be equipped with straightener, tension controller and wire disordered detector to have smoothly wire decoiling. (2) Wire surface treatment tanks: There are fumeless acid pickling tank, degreasing tank, water cleaning tank and activation tank that used for cleaning the wire surface. For low carbon wires, we have the annealing furnace with gas heating or electro heating. (3) Electro galvanizing tank: We use the PP plate as frame and Ti plate for wire galvanizing. The processing solution can be circulated that easy for maintenance. (4) Drying tank: The whole frame is welded by stainless steel and the liner uses fiber cotton to control the inner temperature between 100 to 150℃. (5) Take-ups: Both spool take-up and coil take-up can be used for different sizes galvanized wires. We have supplied hundreds of galvanizing lines to domestic customers and also exported our whole lines to Indonesia, Bulgaria, Vietnam, Uzbekistan, Sri Lanka.
Main features
1. Applicable for high/medium/low carbon steel wire;
2. Better wire coating concentricity;
3. Lower power consumption;
4. Better control of coating weight and consistency;
Main technical specification
|
Item |
Data |
|
Wire diameter |
0.8-6.0mm |
|
Coating weight |
10-300g/m2 |
|
Wire numbers |
24 wires (Can be required by customer) |
|
DV value |
60-160mm*m/min |
|
Anode |
Lead sheet or Titanuim polar plate |
Product detail pictures:
Related Product Guide:
All we do is always involved with our tenet " Consumer initial, Trust first, devoting within the food stuff packaging and environmental defense for OEM Manufacturer Stainless Steel Welding Wire Production Line - Steel Wire Electro Galvanizing Line PengSheng , The product will supply to all over the world, such as: Pretoria, Eindhoven, Jamaica, We only supply quality items and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom merchandise etc that can according to customer's requirement.
By Barbara from South Africa - 2017.07.07 13:00
The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
By Riva from Milan - 2017.05.02 18:28
Related products
-
8 Year Exporter Copper Flat Wire Extrusion Mach...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4,...
-
Factory source Aluminum Extrusion Machine - Co...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Well-designed PC Steel Strand Skip Stranding Ma...
Machine model LT21/200 LT17/250 LT21/350 LT15/450 Inlet wire material High /Medium / Low carbon steel wire; Stainless steel wire; Alloy steel wire Drawing passes 21 17 21 15 Inlet wire Dia. 1.2-0.9mm 1.8-2.4mm 1.8-2.8mm 2.6-3.8mm Outlet wire Dia. 0.4-0.15mm 0.6-0.35mm 0.5-1.2mm 1.2-1.8mm Drawing speed 15m/s 10 8m/s 10m/s Motor power 22KW 30KW 55KW 90KW Main bearings International NSK, SKF bearings or customer ...
-
Factory source PC Steel Strand Production Line ...
Features ● Forged or casted capstan with hardness of HRC 58-62. ● High efficiency transmission with gear box or belt. ● Movable die box for easy adjustment and easy die changing. ● High performance cooling system for the capstan and die box ● High safety standard and friendly HMI control system Available options ● Rotating die box with soap stirrers or rolling cassette ● Forged capstan and tungsten carbide coated capstan ● Accumulation of first drawing blocks ● Block stripper for coiling ● Fi...
-
Personlized Products Wire And Cable Laser Marki...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Factory Price Steel Rope Cage Stranding Machine...
Main technical data No. Model Number of bobbin Rope size Rotating Speed (rpm) Tension wheel size (mm) Motor power (KW) Min. Max. 1 KS 6/630 6 15 25 80 1200 37 2 KS 6/800 6 20 35 60 1600 45 3 KS 8/1000 8 25 50 50 1800 75 4 KS 8/1600 8 50 100 35 3000 90 5 KS 8/1800 8 60 120 30 4000 132 6 KS 8/2000 8 70 150 25 5000 160