OEM/ODM China Scrape Aluminum Casting Machine – Up Casting system of Cu-OF Rod PengSheng

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our primary objective is always to offer our clients a serious and responsible small business relationship, offering personalized attention to all of them for Wire Extrusion Machine, PC Steel Wire Drawing Machine, Flat Wire Extrusion Machine, Our concept is to help presenting the confidence of each buyers with the offering of our most sincere service, and the right product.
OEM/ODM China Scrape Aluminum Casting Machine – Up Casting system of Cu-OF Rod PengSheng Detail:

Raw material

Good quality copper cathode is suggested to be the raw material for the production to ensure the high mechanical and electrical quality product.
Some percentage of recycled copper could be used too. The de-oxygen time in the furnace will be longer and that may shorter the working life of the furnace. A separte melting furnace for the copper scrap could be installed before the melting furnace to use full recycled copper.

Furnace

Bricks and sand built with melting channels, the furnace is electrically induction heated with various melting capacities. Heating power could be adjusted manually or automaticly to keep the molten copper in the controlled temperature range. The heating principle itself and optimized furnace structure design allow the max. power using and the highest efficiency.

Casting machine

The copper rod or tube is cooled and casted by the cooler. The coolers are fixed on the casting machine frame above the holding furnace. With the servomotor driving system, the casted products are pull upward through the coolers. The solid product after cooling is guided to double coilers or cut-to length machine where to have the final coils or length product.
The machine could work with two different sizes simultaneously when equip with two sets of servo driving system. It is easy to produce different sizes by changing related coolers and dies.

Up Casting system of Cu-OF Rod

Overview

Up Casting system of Cu-OF Rod (1)

Casting machine and furnace

Up Casting system of Cu-OF Rod

Charging device

Up Casting system of Cu-OF Rod (3)

Take-up machine

Up Casting system of Cu-OF Rod

Product

Up Casting system of Cu-OF Rod

On-site service

Main technical data

Annual capacity(Tons/Year)

2000

3000

4000

6000

8000

10000

12000

15000

cooler pieces

4

6

8

12

16

20

24

28

Rod Dia. in mm

8,12,17,20,25, 30 and special size demand can be customized

Power Consumption

315 to 350 kwh/ton production

Pulling

Servo motor and inverter

Charging

Manual or automatic type

Control

PLC and touch screen operation

Supply of spare parts

Up Casting system of Cu-OF Rod

Fusion channel

Up Casting system of Cu-OF Rod

Shaped brick

Up Casting system of Cu-OF Rod

Light temperature-keeping brick

Up Casting system of Cu-OF Rod

Crystallizer assembly

Up Casting system of Cu-OF Rod

Inner tube of crystallizer

Up Casting system of Cu-OF Rod

Water tube of crystallizer

Up Casting system of Cu-OF Rod

Quick joint

Up Casting system of Cu-OF Rod

Graphite die

Up Casting system of Cu-OF Rod

Graphite protective case & lining

Up Casting system of Cu-OF Rod

Asbestos rubber blanket

Up Casting system of Cu-OF Rod

Nano insulation board

Up Casting system of Cu-OF Rod

Cr fiber blanket


Product detail pictures:

OEM/ODM China Scrape Aluminum Casting Machine – Up Casting system of Cu-OF Rod PengSheng detail pictures


Related Product Guide:

We consistently carry out our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for OEM/ODM China Scrape Aluminum Casting Machine – Up Casting system of Cu-OF Rod PengSheng , The product will supply to all over the world, such as: Casablanca, Rwanda, Eindhoven, So far our merchandise have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have now 13years experienced sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to provide our customers with high quality items and excellent service.
  • It is a very good, very rare business partners, looking forward to the next more perfect cooperation!
    5 Stars By Maggie from Estonia - 2018.06.09 12:42
    The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Dale from Angola - 2017.11.12 12:31
    Write your message here and send it to us

    Related products

    • Factory Supply Prestressed Steel Wire Stranding Line - Steel Wire Hot-Dip Galvanizing Line PengSheng

      Factory Supply Prestressed Steel Wire Stranding...

      Galvanized wire products ● Low carbon bedding spring wire ● ACSR (Aluminum conductor steel reinforced) ● Armoring cables ● Razor wires ● Baling wires ● Some general purpose galvanized strand ● Galvanized wire mesh & fence  Main features ● High efficiency heating unit and insulation ● Matal or ceramic pot for zinc ● Immersion type burners with full-auto N2 wiping system ● Fumes energy reused on the dryer and zinc pan ● Networked PLC control system Item Specification Inlet wire ma...

    • factory low price High Carbon Galvanizing Line For Steel Wire - Wet steel wire drawing machine PengSheng

      factory low price High Carbon Galvanizing Line ...

      Machine model LT21/200 LT17/250 LT21/350 LT15/450 Inlet wire material High /Medium / Low carbon steel wire; Stainless steel wire; Alloy steel wire Drawing passes 21 17 21 15 Inlet wire Dia. 1.2-0.9mm 1.8-2.4mm 1.8-2.8mm 2.6-3.8mm Outlet wire Dia. 0.4-0.15mm 0.6-0.35mm 0.5-1.2mm 1.2-1.8mm Drawing speed 15m/s 10 8m/s 10m/s Motor power 22KW 30KW 55KW 90KW Main bearings International NSK, SKF bearings or customer ...

    • OEM China Weding Wire Forming And Drawing Machine - Continuous Extrusion Machinery PengSheng

      OEM China Weding Wire Forming And Drawing Machi...

       Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...

    • Newly Arrival Galvanizing Furnace For Steel Wire - Steel Wire Electro Galvanizing Line PengSheng

      Newly Arrival Galvanizing Furnace For Steel Wir...

      We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requi...

    • Hot New Products Horizontal Taping Line - PI Film/Kapton® Taping Machine PengSheng

      Hot New Products Horizontal Taping Line - PI F...

      Main technical data Round conductor diameter: 2.5mm—6.0mm Flat conductor area: 5 mm²—80 mm²(Width: 4mm-16mm, Thickness: 0.8mm-5.0mm) Rotating speed: max. 1500 rpm Line speed: max. 12 m/min Special Characteristics -Servo drive for the concentric tapping head -IGBT induction heater and moving radiant oven -Auto-stop when film broken -PLC control and touch screen operation Overview Taping   IGBT Induction heater Radiant oven Take-up Product

    • Manufacturer of Steel Wire & Rope Stranding Line - Continuous Extrusion Machinery PengSheng

      Manufacturer of Steel Wire & Rope Stranding...

       Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...