PriceList for Invert Vertical Steel Wire Drawing Machine - Steel Wire Electro Galvanizing Line PengSheng
PriceList for Invert Vertical Steel Wire Drawing Machine - Steel Wire Electro Galvanizing Line PengSheng Detail:
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requirements. (1) Pay-offs: Both spool type pay-off and coil type pay-off will be equipped with straightener, tension controller and wire disordered detector to have smoothly wire decoiling. (2) Wire surface treatment tanks: There are fumeless acid pickling tank, degreasing tank, water cleaning tank and activation tank that used for cleaning the wire surface. For low carbon wires, we have the annealing furnace with gas heating or electro heating. (3) Electro galvanizing tank: We use the PP plate as frame and Ti plate for wire galvanizing. The processing solution can be circulated that easy for maintenance. (4) Drying tank: The whole frame is welded by stainless steel and the liner uses fiber cotton to control the inner temperature between 100 to 150℃. (5) Take-ups: Both spool take-up and coil take-up can be used for different sizes galvanized wires. We have supplied hundreds of galvanizing lines to domestic customers and also exported our whole lines to Indonesia, Bulgaria, Vietnam, Uzbekistan, Sri Lanka.
Main features
1. Applicable for high/medium/low carbon steel wire;
2. Better wire coating concentricity;
3. Lower power consumption;
4. Better control of coating weight and consistency;
Main technical specification
|
Item |
Data |
|
Wire diameter |
0.8-6.0mm |
|
Coating weight |
10-300g/m2 |
|
Wire numbers |
24 wires (Can be required by customer) |
|
DV value |
60-160mm*m/min |
|
Anode |
Lead sheet or Titanuim polar plate |
Product detail pictures:
Related Product Guide:
Our intention is usually to satisfy our buyers by offering golden provider, great rate and good quality for PriceList for Invert Vertical Steel Wire Drawing Machine - Steel Wire Electro Galvanizing Line PengSheng , The product will supply to all over the world, such as: Portland, Belize, Angola, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of "Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.
By Meroy from Latvia - 2018.09.29 13:24
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
By Andrew Forrest from America - 2017.08.15 12:36
Related products
-
Fixed Competitive Price Steel Rope Stranding Ma...
Features ● Forged or casted capstan with hardness of HRC 58-62. ● High efficiency transmission with gear box or belt. ● Movable die box for easy adjustment and easy die changing. ● High performance cooling system for the capstan and die box ● High safety standard and friendly HMI control system Available options ● Rotating die box with soap stirrers or rolling cassette ● Forged capstan and tungsten carbide coated capstan ● Accumulation of first drawing blocks ● Block stripper for coiling ● Fi...
-
Factory Cheap Hot Inverted Steel Wire Drawing M...
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requi...
-
Special Design for Electrolytic Galvanizing Lin...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Manufacturer of Steel Rope Tubular Stranding Ma...
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requi...
-
Renewable Design for Cage Type Steel Strander -...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Reliable Supplier Wire Packing Machine - Conti...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...