Renewable Design for Hot-Dip Steel Wire Galvanizing Line - Steel Wire Electro Galvanizing Line PengSheng
Renewable Design for Hot-Dip Steel Wire Galvanizing Line - Steel Wire Electro Galvanizing Line PengSheng Detail:
We offer both hot dip type galvanizing line and also electro type galvanizing line that specialized for smaller zinc coated thickness steel wires used on various applications. The line is suitable for high/medium/low carbon steel wires from 1.6mm up to 8.0mm. We have high efficiency surface treatment tanks for wire cleaning and PP material galvanizing tank with better wear resistance. The final electro galvanized wire can be collected on the spools and baskets that according to customer requirements. (1) Pay-offs: Both spool type pay-off and coil type pay-off will be equipped with straightener, tension controller and wire disordered detector to have smoothly wire decoiling. (2) Wire surface treatment tanks: There are fumeless acid pickling tank, degreasing tank, water cleaning tank and activation tank that used for cleaning the wire surface. For low carbon wires, we have the annealing furnace with gas heating or electro heating. (3) Electro galvanizing tank: We use the PP plate as frame and Ti plate for wire galvanizing. The processing solution can be circulated that easy for maintenance. (4) Drying tank: The whole frame is welded by stainless steel and the liner uses fiber cotton to control the inner temperature between 100 to 150℃. (5) Take-ups: Both spool take-up and coil take-up can be used for different sizes galvanized wires. We have supplied hundreds of galvanizing lines to domestic customers and also exported our whole lines to Indonesia, Bulgaria, Vietnam, Uzbekistan, Sri Lanka.
Main features
1. Applicable for high/medium/low carbon steel wire;
2. Better wire coating concentricity;
3. Lower power consumption;
4. Better control of coating weight and consistency;
Main technical specification
|
Item |
Data |
|
Wire diameter |
0.8-6.0mm |
|
Coating weight |
10-300g/m2 |
|
Wire numbers |
24 wires (Can be required by customer) |
|
DV value |
60-160mm*m/min |
|
Anode |
Lead sheet or Titanuim polar plate |
Product detail pictures:
Related Product Guide:
With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for Renewable Design for Hot-Dip Steel Wire Galvanizing Line - Steel Wire Electro Galvanizing Line PengSheng , The product will supply to all over the world, such as: Oslo, Croatia, India, With the highest standards of product quality and service, our products have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We are very pleased to serve customers from all over the world!
By Cornelia from Argentina - 2018.11.22 12:28
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Jocelyn from UAE - 2017.11.11 11:41
Related products
-
OEM China Steel Wire Strander - Steel Wire Hot...
Galvanized wire products ● Low carbon bedding spring wire ● ACSR (Aluminum conductor steel reinforced) ● Armoring cables ● Razor wires ● Baling wires ● Some general purpose galvanized strand ● Galvanized wire mesh & fence Main features ● High efficiency heating unit and insulation ● Matal or ceramic pot for zinc ● Immersion type burners with full-auto N2 wiping system ● Fumes energy reused on the dryer and zinc pan ● Networked PLC control system Item Specification Inlet wire ma...
-
Manufacturing Companies for Steel Strip Forming...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...
-
Competitive Price for Wire And Cable Laser Mark...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4,...
-
PriceList for Copper Drawing Machine - Continu...
Advantages 1, plastic deformation of feeding rod under the friction force and high temperature which eliminates the internal defects in the rod itself completely to ensure the final products with excellent product performance and high dimensional accuracy. 2, neither preheating nor annealing, good quality products gained by extrusion process with lower power consumption. 3, with a single size rod feeding, the machine could produce a wide size range of products by using different dies. 4, the...
-
Hot New Products Aluminum Clad Steel Wire Conti...
Productivity • touchscreen display and control, high automatic operation • quick drawing die change system and elongation to each die is adjustable for easy operation and high speed running • single or double wire path design to meet different production requirements • greatly reduces the generation of slip in the drawing process, microslip or no-slip makes the finished products with good quality Efficiency • suitable for variety of non-ferrous metals, copper, aluminum, aluminum alloy, brass,...
-
Popular Design for Laser Marking Machine - Con...
Principle The principle of continuous cladding/sheathing is similar with that of continuous extrusion. Using tangential tooling arrangement, the extrusion wheel drives two rods into the cladding/sheathing chamber. Under the high temperature and pressure, the material either reaches the condition for metallurgical bonding and forms a metal protective layer to directly clad the metal wire core that enters the chamber (cladding), or is extruded through the space between mandrel and cavity die t...